Freitag, 5. November 2021

BEACHPULLI

 

English below

Der Beachpulli wird in einer leichten Baumwoll-Wollmischung nahtlos von oben nach unten mit Raglanärmeln gestrickt.
Begonnen wird in Hin- und Rückreihen, bis der leichte V-Ausschnitt fertig ist. Dann wird in Runden gestrickt.

Body und Ärmel erhalten eine seitliche Struktur mit einer Fakenaht, durch stricken einer linken Masche. Die Bauchtasche wird direkt aus den Maschen des Bodys gestrickt und vor dem Bündchen wieder mit den Bodymaschen zusammen gestrickt. Das Bündchen am Body ist geteilt und hinten länger. Die Kapuze wird direkt an den Ausschnitt gestrickt. Sie hat einen I Cord Rand.



   Das Strickmuster ist in Deutsch und Englisch

Wolle: Geilsk Bomuld og uld, 55% Wolle, 45% Baumwolle. 232 m / 50 g

Empfohlene Nadeln: Rundstricknadel 3.5 mm (80 cm lang) und Rundstricknadel 3 mm ( 80 cm lang und ein Nadelspiel, falls nicht mit der Magic Loop Methode gestrickt wird)

Maschenprobe: 23 M x 33 Rd glatt rechts gestrickt = 10x10 cm, Nadel 3.5 mm

Größenratgeber

Der Pullover ist leicht oversized und fällt locker. Er sollte einen Bewegungsspielraum (positive ease) von 15 - 25 cm zu deinem tatsächlichen Brustumfang haben.

Das Titelmodel trägt eine Größe M, bei einem eigentlichen Brustumfang von 95 cm und 1,64 m Größe. Der Beachpulli hat bei ihr eine „positive Ease“ von 24 cm.

Größen: XS (S, M, L, XL, 2XL )
Die Größen entsprechen einem Brustumfang am Körper von ca. 80-85 (85-90, 90-95, 95-100, 100-110, 110-120 ) cm. Der Beachpulli sollte einen Bewegungsspielraum von ca. 15 - 25 cm haben.
Brustumfang Pullover: 106 (110,116,120,129,134) cm
Länge hinten: 60 cm
Ärmellänge: 40 cm

Schwierigkeitsgrad: ★★★★☆

Das Strickmuster Beachpulli ist bei Ravelry für 7.00 € erhältlich  Buy now 


The beach jumper, knitted in a light comfortable cotton/wool blend, is knitted seamlessly topdown with raglan sleeves.

Start in back and forth rows until the slight V-neck is completed, then close the round and continue knitting in rounds. The increases are made in the raglan seams. 

After separating the sleeves, the body is knitted in rounds. Body and sleeves are given a side structure by a fake seam using a purl stitch. 

For the belly pocket, stitches are knitted out of the wrong side and at the end the stitches of the belly pocket are knitted together with the stitches of the cuff. So there is very little sewing here. The cuff is divided and longer at the backside.

The threads can easily be sewn in the fake seam.

The hood is knitted directly to the neckline. The neckline is worked deeper in the front with short rows.


Yarn: Geilsk Bomuld og uld, 55% Wool, 45% Cotton. 232 m (254 yds) / 50 g 


Needle: Circular needles 3.5 mm [US4] 40 and 80 cm [16, 32 inches] and 3 mm [US3] 40 and 80 cm [16, 32 inches] or Double-pointed needles for the sleeves in 3.5 mm [US4] and 3 mm [¨US3] 


Gauge: 23 sts x 33 rds = 4“ in stockinette stitch with 3.5 mm [US4] needles


Size guide:

The jumper is slightly oversized and falls loosely. This Beachpulli is designed to be worn with 15 - 25 cm of positive ease; however, this is just a guide. Some people prefer a closer fit; do not be afraid to select an option that provides somewhat less than the suggested ease according to your own preferences. 

The cover model wears a size M, with an actual chest measurement of 95 cm and a body  height of 1.64 cm. The Beachpulli has a positive ease of 24 cm on her.


Sizes: XS (S, M, L, XL, 2XL)

The sizes XS (S, M, L, XL, 2XL) are designed to fit a bust circumference of 80-85 (85-90, 90-95, 95-100, 100-110, 110-120) cm [31½-33½ (33½-35½,  35½-37½, 37½-39½,  39½-43¼, 43¼-47¼) inches].


The knitting pattern is available on Ravelry for 7.00 €  Buy now  



  

Keine Kommentare:

Kommentar veröffentlichen